LIMBOPLAST KSP 150
Cold spray plastic
LIMBOPLAST KSP 150 belongs to the group of solvent-free, multi-component, reactive systems and consists of two or more components which chemically react with each other. It can be applied as type I marking as well as type II rain safety marking and has been tested on the wear simulator at the German Road Institute (BASt).
RPA-Test Reports by BAST for
LIMBOPLAST KSP 150
Test report- no. | Layer | Consumption | Drop-on Material (DOM) | Traffic technological | ||
mm | material | DOM | Identification | New condition | Used condition | |
kg/m² | kg/m² | |||||
Type-I markings | ||||||
0.3 | 0.474 | 0.30 | SWARCO SOLIDPLUS 10 P21 T18 M25 | P7, S1, R5, Q5, T2 | P7, S1, R5, Q5 | |
0.4 | 0.632 | 0.40 | SWARCO SOLIDPLUS 10 P21 T18 M25 | P7, S1, R5, Q5, T2 | P7, S2, R5, Q5 | |
0.4 | 0.632 | 0.40 | SWARCO SOLIDPLUS 50 P21 T18 M25 | P7, S1, R5, Q5, T2 | P7, S1, R5, Q5 | |
Type-II-markings | ||||||
0.6 | 0.942 | 0.60 | SWARCO SOLIDPLUS 10 425-1400 T18 MK30 | P7, S1, R5, RW6, Q5, T2 | P7, S1, R5, RW6, Q5 | |
0.7 | 1.106 | 0.70 | SWARCO SOLIDPLUS 10 425-1400 T18 MK30 | P7, S1, R5, RW6, Q5, T2 | P7, S1, R5, RW6, Q5 | |
